Recently added

The applicability of 3D effects to pseudo-static design acceptance criteria: The recovery design for Wall 375

Zabolotnii, Elena; Dirikolu, Tarik; Kumar, Jeeva Subramaniam; Venter, Julian; Read, John (2025-09-02)

Seismic hazard with deterministic maximum limits: Considerations in a New Zealand-specific context

Bradley, Brendon A (2025-03-01)

Benefits of site-specific hazard analysis for seismic design in New Zealand: Revisited

Bradley, Brendon A (2025-12-01)

Communicating seismic building risk with commercial building tenants

Miranda, Catalina; Eade, Cameron; Brown, Charlotte; Becker, Julia; Doyle, Emma (2025-09-02)

The Shaking Layers project: Near-real time shaking intensity maps for New Zealand earthquakes: Project overview

Goded, Tatiana; Horspool, Nick; Kaiser, Anna; Chadwick, Mark; Groom, Joshua; Houltham, Jeremy; Harvey, Sue; Charlton, Danielle; Wu, Howard; Peng, Baishan; Morris, Callum; Abbott, Elizabeth; Hanson, Jonathan; Andrews, Jen; Fry, Bill; White, Rcahel (2025-12-01)

Site classification methodology for TS 1170.5 design spectra

Lee, Robin; Cubrinovski, Misko; Bradley, Brendon (2025-03-01)

Monotonic testing of brace assemblies for piping systems and considerations for capacity design

Rashid, Muhammad; Dhakal, Rajesh; Sullivan, Timothy (2024-06-02)

Seismic design of buildings: Where to next?

Dhakal, Rajesh (2024-02-29)

Assessing the life-safety risk for the proposed technical specification (TS) 1170.5

Hulsey, Anne; Elwood, Ken; Horspool, Nick; Gerstenberger, Matt; Sullivan, Timothy (2025-06-01)

Investigating the impacts of design ductility values and importance levels on the performance of base-isolated buildings in New Zealand

Dong, Claire; Sullivan, Timothy; Pettinga, Didier (2025-09-02)

Overview of TS 1170.5:2025 and changes from NZS 1170.5:2004

Elwood, Kenneth; Gerstenberger, Matthew; Horspool, Nick; Hulsey, Anne; Jury, Rob; Wentz, Rick; Cubrinovski, Misko; Hare, John; Hooper, John; Philott, Anna; Sullivan, Tim (2025-06-01)

Recommendations for the shape of the design response spectrum in the New Zealand seismic loadings technical specification

Francis, Tom; Sullivan, Timothy; Hulsey, Anne; Elwood, Kenneth (2025-06-01)

Tuning procedure for the resilient slip-friction joint (RSFJ)

Chan, Nicholas; Hashemi, Ashkan; Quenneville, Pierre (2025-12-01)

The significance of polarisation in near-fault ground motions – A case study of February 2023 Kahramanmaras M7.7 earthquake

Moghimi, Saed; Manie, Salar (2024-12-01)

A comparative investigation on experimental lateral behaviour of bare RC frame, non-strengthened and ferrocement strengthened masonry infilled RC frame

Sen, Debasish; Tuz Zahura, Fatema; Das, Anik; Alwashali, Hamood; Islam, Md. Shafiul; Maeda, Masaki; Seki, Matsutaro; Bhuiyan, Muhammad Abdur Rahman (2024-06-02)

Method to identify if torsional mode of a building is its first mode

G, TAMIZHARASI; C.V.R.Mury (2024-06-02)

Recommendations for the revision of the approach for seismic design of parts and components in New Zealand design standards

Haymes, Kieran; Sullivan, Timothy J.; Hare, John (2025-03-01)

New Zealand Society for Earthquake Engineering: Recent submissions

The applicability of 3D effects to pseudo-static design acceptance criteria: The recovery design for Wall 375

Seismic hazard with deterministic maximum limits: Considerations in a New Zealand-specific context

Benefits of site-specific hazard analysis for seismic design in New Zealand: Revisited

Communicating seismic building risk with commercial building tenants

The Shaking Layers project: Near-real time shaking intensity maps for New Zealand earthquakes: Project overview

Site classification methodology for TS 1170.5 design spectra

Monotonic testing of brace assemblies for piping systems and considerations for capacity design

Seismic design of buildings: Where to next?

Assessing the life-safety risk for the proposed technical specification (TS) 1170.5

Investigating the impacts of design ductility values and importance levels on the performance of base-isolated buildings in New Zealand

Overview of TS 1170.5:2025 and changes from NZS 1170.5:2004

Recommendations for the shape of the design response spectrum in the New Zealand seismic loadings technical specification

Tuning procedure for the resilient slip-friction joint (RSFJ)

The significance of polarisation in near-fault ground motions – A case study of February 2023 Kahramanmaras M7.7 earthquake

A comparative investigation on experimental lateral behaviour of bare RC frame, non-strengthened and ferrocement strengthened masonry infilled RC frame

Method to identify if torsional mode of a building is its first mode

Recommendations for the revision of the approach for seismic design of parts and components in New Zealand design standards

New Zealand specific consequence functions for seismic loss assessment

Seismic fragility of reinforced concrete buildings with hollow-core flooring systems

Rapid repair of RC columns with post-tensioned external clamps

New Zealand Society for Earthquake Engineering: Recent submissions

The applicability of 3D effects to pseudo-static design acceptance criteria: The recovery design for Wall 375 ﻿

Seismic hazard with deterministic maximum limits: Considerations in a New Zealand-specific context ﻿

Benefits of site-specific hazard analysis for seismic design in New Zealand: Revisited ﻿

Communicating seismic building risk with commercial building tenants ﻿

The Shaking Layers project: Near-real time shaking intensity maps for New Zealand earthquakes: Project overview ﻿

Site classification methodology for TS 1170.5 design spectra ﻿

Monotonic testing of brace assemblies for piping systems and considerations for capacity design ﻿

Seismic design of buildings: Where to next? ﻿

Assessing the life-safety risk for the proposed technical specification (TS) 1170.5 ﻿

Investigating the impacts of design ductility values and importance levels on the performance of base-isolated buildings in New Zealand ﻿

Overview of TS 1170.5:2025 and changes from NZS 1170.5:2004 ﻿

Recommendations for the shape of the design response spectrum in the New Zealand seismic loadings technical specification ﻿

Tuning procedure for the resilient slip-friction joint (RSFJ) ﻿

The significance of polarisation in near-fault ground motions – A case study of February 2023 Kahramanmaras M7.7 earthquake ﻿

A comparative investigation on experimental lateral behaviour of bare RC frame, non-strengthened and ferrocement strengthened masonry infilled RC frame ﻿

Method to identify if torsional mode of a building is its first mode ﻿

Recommendations for the revision of the approach for seismic design of parts and components in New Zealand design standards ﻿

New Zealand specific consequence functions for seismic loss assessment ﻿

Seismic fragility of reinforced concrete buildings with hollow-core flooring systems ﻿

Rapid repair of RC columns with post-tensioned external clamps ﻿

The applicability of 3D effects to pseudo-static design acceptance criteria: The recovery design for Wall 375

Seismic hazard with deterministic maximum limits: Considerations in a New Zealand-specific context

Benefits of site-specific hazard analysis for seismic design in New Zealand: Revisited

Communicating seismic building risk with commercial building tenants

The Shaking Layers project: Near-real time shaking intensity maps for New Zealand earthquakes: Project overview

Site classification methodology for TS 1170.5 design spectra

Monotonic testing of brace assemblies for piping systems and considerations for capacity design

Seismic design of buildings: Where to next?

Assessing the life-safety risk for the proposed technical specification (TS) 1170.5

Investigating the impacts of design ductility values and importance levels on the performance of base-isolated buildings in New Zealand

Overview of TS 1170.5:2025 and changes from NZS 1170.5:2004

Recommendations for the shape of the design response spectrum in the New Zealand seismic loadings technical specification

Tuning procedure for the resilient slip-friction joint (RSFJ)

The significance of polarisation in near-fault ground motions – A case study of February 2023 Kahramanmaras M7.7 earthquake

A comparative investigation on experimental lateral behaviour of bare RC frame, non-strengthened and ferrocement strengthened masonry infilled RC frame

Method to identify if torsional mode of a building is its first mode

Recommendations for the revision of the approach for seismic design of parts and components in New Zealand design standards

New Zealand specific consequence functions for seismic loss assessment

Seismic fragility of reinforced concrete buildings with hollow-core flooring systems

Rapid repair of RC columns with post-tensioned external clamps