• Login
    View Item 
    •   NZSEE Document Repository
    • New Zealand Society for Earthquake Engineering
    • Bulletin of the New Zealand Society for Earthquake Engineering
    • View Item
    •   NZSEE Document Repository
    • New Zealand Society for Earthquake Engineering
    • Bulletin of the New Zealand Society for Earthquake Engineering
    • View Item
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Proposed development of a damage-resisting Eccentrically Braced Frame with rotational active links

    Thumbnail
    Date
    2011-06-30
    Authors
    Khan, Mahbub H.
    Clifton, G. Charles
    Metadata
    Show full item record
    Abstract
    Eccentrically Braced Frames (EBFs) are widely used seismic-resisting systems, as they allow both strength and stiffness to be optimised while providing good ductility capacity. However, in theory they have a low damage threshold in severe earthquakes and post-earthquake repair of conventional EBFs will be difficult and expensive. This paper presents the Numerical Integration Time-History (NITH) analysis of two ten storey EBF buildings; one with a conventional active link and the other with a new form of low damage active link based on rotational sliding bolted plates. The low damage active link can be designed to allow rotation only, or to allow both rotation and axial extension. The conventional active link response in terms of displacement, rotation and inelastic demand was well within the range of the rotational active links under the records considered. The analysis shows that average maximum displacement of the building and rotation of the link for both the rotational and the rotational+extension active links was almost identical. The extension of the rotational active link permitting axial extension was less than 1.5 mm. Axial load demands on the collector beams and braces were similar in the case all three active links. It can be concluded from the analysis that the rotational active link with extension is not required, as the lateral extensions can be accommodated within the rotational plates with nominal clearances in the bolt holes to accommodate the lateral extension.
    URI
    https://doi.org/10.5459/bnzsee.44.2.99-107
    Published in
    • Bulletin of the New Zealand Society for Earthquake Engineering

    Contact Us | Send Feedback
     

     

    Browse

    Entire RepositoryCommunities & CollectionsBy Issue DateAuthorsTitlesSubjectsThis CollectionBy Issue DateAuthorsTitlesSubjects

    My Account

    Login

    Contact Us | Send Feedback