Recently added

Shaking table tests of a base isolated structure with Double Concave Friction Pendulum bearings

Ponzo, Felice C.; Cesare, Antonio D.; Leccese, Gianmarco; Nigro, Domenico (2015-06-30)

Design of base-isolated buildings

Pietra, Dario; Pampanin, Stefano; Mayes, Ron L.; Wetzel, Nicholas G.; Feng, Demin (2015-06-30)

An inventory of unreinforced masonry churches in New Zealand

Marotta, Alessandra; Goded, Tatiana; Giovinazzi, Sonia; Lagomarsino, Sergio; Liberatore, Domenico; Sorrentino, Luigi; Ingham, Jason M. (2015-09-30)

Supplemental dampers in base-isolated buildings to mitigate large isolator displacement under earthquake excitations

Zelleke, Daniel H.; Elias, Said; Matsagar, Vasant A.; Jain, Arvind K. (2015-06-30)

Comparison of a Christchurch-specific CPT-Vs correlation and Vs derived from surface wave analysis for strong motion station velocity characterisation

McGann, Christopher R.; Bradley, Brendon A.; Wotherspoon, Liam M.; Cox, Brady R. (2015-06-30)

Innovative connections for precast concrete moment resisting frames

Behnamfar, Farhad; Rafizadeh, Hadi; Omidi, Mortza (2015-09-30)

Benefits of site-specific hazard analyses for seismic design in New Zealand

Bradley, Brendon A. (2015-06-30)

Non-destructive method to investigate the hardness-plastic strain relationship in cyclically deformed structural steel elements

Nashid, Hassan; Ferguson, W.G.; Clifton, G.C.; Hodgson, M.; Battley, M.; Seal, C.; Choi, J.H. (2014-09-30)

The 2014 South Napa earthquake and its relevance for New Zealand

Galloway, Bruce; Ingham, Jason M. (2015-03-31)

Seismic analysis of in-plane loaded walls in unreinforced masonry buildings with flexible diaphragms

Nakamura, Yasuto; Derakhshan, Hossein; Ingham, Jason M.; Griffith, Michael C. (2014-12-31)

Potential of Building Information Modelling for seismic risk mitigation in buildings

Welch, David P.; Sullivan, Timothy J.; Filiatrault, Andre (2014-12-31)

Floor diaphragms and a truss method for their analysis

Scarry, J.M. (2015-03-31)

Experimental testing and design of BRB with bolted and pinned connections

Wijanto, Stefan; Clifton, G. Charles (2014-12-31)

Suitability of CFT columns for New Zealand moment frames

Chunhaviriyakul, Ponpong; MacRae, Gregory A.; Anderson, Dave; Clifton, G. Charles; Leon, Roberto T. (2015-03-31)

URM bearing wall building seismic risk mitigation on the west coast of the United States

Paxton, Brandon; Turner, Fred; Elwood, Ken; Ingham, Jason M. (2015-03-31)

Representative ground-motion ensembles for several major earthquake scenarios in New Zealand

Tarbali, Karim; Bradley, Brendon A. (2014-12-31)

Tauroa residential subdivision

Gerbrandt, Riley C. (2014-12-31)

An inventory of unreinforced load-bearing stone masonry buildings in New Zealand

Giaretton, Marta; Dizhur, Dmytro; da Porto, Francesca; Ingham, Jason M. (2014-06-30)

Generalised nonlinear modeling of unstable stick-slip force reduction effects in friction energy dissipation devices

Rodgers, Geoffrey W; Mesnil, Oliver; Chanchi, Jose; MacRae, Gregory A.; Clifton, Charles; Chase, J Geoffrey (2014-09-30)

Detailed seismic assessment and improvement procedure for vintage flexible timber diaphragms

Giongo, Ivan; Wilson, Aaron; Dizhur, Dmytro Y.; Derakhshan, Hossein; Tomasi, Roberto; Griffith, Michael C.; Quenneville, Pierre; Ingham, Jason M. (2014-06-30)

Bulletin of the New Zealand Society for Earthquake Engineering: Recent submissions

Shaking table tests of a base isolated structure with Double Concave Friction Pendulum bearings ﻿

Design of base-isolated buildings ﻿

An inventory of unreinforced masonry churches in New Zealand ﻿

Supplemental dampers in base-isolated buildings to mitigate large isolator displacement under earthquake excitations ﻿

Comparison of a Christchurch-specific CPT-Vs correlation and Vs derived from surface wave analysis for strong motion station velocity characterisation ﻿

Innovative connections for precast concrete moment resisting frames ﻿

Benefits of site-specific hazard analyses for seismic design in New Zealand ﻿

Non-destructive method to investigate the hardness-plastic strain relationship in cyclically deformed structural steel elements ﻿

The 2014 South Napa earthquake and its relevance for New Zealand ﻿

Seismic analysis of in-plane loaded walls in unreinforced masonry buildings with flexible diaphragms ﻿

Potential of Building Information Modelling for seismic risk mitigation in buildings ﻿

Floor diaphragms and a truss method for their analysis ﻿

Experimental testing and design of BRB with bolted and pinned connections ﻿

Suitability of CFT columns for New Zealand moment frames ﻿

URM bearing wall building seismic risk mitigation on the west coast of the United States ﻿

Representative ground-motion ensembles for several major earthquake scenarios in New Zealand ﻿

Tauroa residential subdivision ﻿

An inventory of unreinforced load-bearing stone masonry buildings in New Zealand ﻿

Generalised nonlinear modeling of unstable stick-slip force reduction effects in friction energy dissipation devices ﻿

Detailed seismic assessment and improvement procedure for vintage flexible timber diaphragms ﻿