Recently added

A distributed-source approach to modelling the spatial distribution of MM intensities resulting from large crustal New Zealand earthquakes

Dowrick, D. J.; Rhoades, D. A. (2010-06-30)

Building safety evaluation following the 30 September 2009 Padang earthquake, Indonesia

Brunsdon, Dave; Bothara, Jitendra; Stannard, Mike; Beetham, Dick; Brown, Roger; Hyland, Clark; Lewis, Warren; Miller, Scott; Sanders, Rebecca; Sulistio, Yakso (2010-09-30)

Using upper storeys as semi-active tuned mass damper building systems

Chey, M. H.; Rodgers, Geoffrey W.; Chase, J. Geoffrey; Mander, John B. (2010-06-30)

Seismic actions on acceleration sensitive non-structural components in ductile frames

Uma, S. R.; Zhao, John X.; King, Andrew B. (2010-06-30)

Prevalence of New Zealand’s unreinforced masonry buildings

Russell, Alistair P.; Ingham, Jason M. (2010-09-30)

The sliding hinge joint moment connection

MacRae, Gregory A.; Clifton, G. Charles; Mackinven, Hamish; Mago, Nandor; Butterworth, John; Pampanin, Stefano (2010-09-30)

Plastic hinge locations in steel columns

MacRae, Gregory A.; Lu, Arthur Y. C.; Peng, Brian H. H.; Hann, Chris; Ziemian, Ron; Clifton, G. Charles (2010-03-31)

Microtremor coherency

Stephenson, W. R. (2010-03-31)

The Mw 7.6 Dusky Sound earthquake of 2009

Fry, Bill; Bannister, Stephen; Beavan, John; Bland, Lara; Bradley, Brendon; Cox, Simon; Cousins, Jim; Gale, Nora; Hancox, Graham; Holden, Caroline; Jongens, Richard; Power, William; Prasetya, Gegar; Reyners, Martin; Ristau, John; Robinson, Russell; Samsonov, Sergey; Wilson, Kate; GeoNet team (2010-03-31)

Customising semi-active resetable device behaviour for abating seismic structural response

Rodgers, Geoffrey W.; Chase, J. Geoffrey; Mulligan, Kerry J.; Mander, John B.; Elliott, Rodney B. (2009-09-30)

Determination of structural irregularity limits

Sadashiva, Vinod K.; MacRae, Gregory A.; Deam, Bruce L. (2009-12-31)

The Ms 8.0 Wenchuan earthquake of 12 May 2008 reconnaissance report

Yu, Jiashun; Yong, Philip; Read, Stuart; Brabhaharan, P.; Foon, Meng (2010-03-31)

Direct Displacement-Based Design of a RC wall-steel EBF dual system with added dampers

Sullivan, Timothy J. (2009-09-30)

Semi-active MR dampers for seismic control of structures

Kori, Jagadish G.; Jangid, R.S. (2009-09-30)

Lateral stress effects on liquefaction resistance correlations

Harada, Kenji; Orense, Rolando P.; Ishihara, Kenji; Mukai, Jun (2010-03-31)

Tentative seismic design guidelines for rocking structures

Kelly, Trevor E. (2009-12-31)

Evaluation and control of the in-plane stiffness of timber floors for the performance-based retrofit of URM buildings

Brignola, Anna; Pampanin, Stefano; Podestà, Stefano (2009-09-30)

The Mw 6.7 George Sound earthquake of October 15, 2007

Petersen, Tanja; Ristau, John; Beavan, John; Denys, Paul; Denham, Mike; Field, Bryan; François-Holden, Caroline; McCaffrey, Rob; Palmer, Neville; Reyners, Martin; Samsonov, Sergey; The GeoNet team (2009-06-30)

Assessment of material strain limits for defining plastic regions in concrete structures

Walker, Adam F.; Dhakal, Rajesh P. (2009-06-30)

Seismic loss estimation for efficient decision making

Bradley, Brendon A.; Dhakal, Rajesh P.; Cubrinovski, Misko; MacRae, Gregory A.; Lee, Dominic S. (2009-06-30)

Bulletin of the New Zealand Society for Earthquake Engineering: Recent submissions

A distributed-source approach to modelling the spatial distribution of MM intensities resulting from large crustal New Zealand earthquakes ﻿

Building safety evaluation following the 30 September 2009 Padang earthquake, Indonesia ﻿

Using upper storeys as semi-active tuned mass damper building systems ﻿

Seismic actions on acceleration sensitive non-structural components in ductile frames ﻿

Prevalence of New Zealand’s unreinforced masonry buildings ﻿

The sliding hinge joint moment connection ﻿

Plastic hinge locations in steel columns ﻿

Microtremor coherency ﻿

The Mw 7.6 Dusky Sound earthquake of 2009 ﻿

Customising semi-active resetable device behaviour for abating seismic structural response ﻿

Determination of structural irregularity limits ﻿

The Ms 8.0 Wenchuan earthquake of 12 May 2008 reconnaissance report ﻿

Direct Displacement-Based Design of a RC wall-steel EBF dual system with added dampers ﻿

Semi-active MR dampers for seismic control of structures ﻿

Lateral stress effects on liquefaction resistance correlations ﻿

Tentative seismic design guidelines for rocking structures ﻿

Evaluation and control of the in-plane stiffness of timber floors for the performance-based retrofit of URM buildings ﻿

The Mw 6.7 George Sound earthquake of October 15, 2007 ﻿

Assessment of material strain limits for defining plastic regions in concrete structures ﻿

Seismic loss estimation for efficient decision making ﻿